Banner
Home > News > Content
Discussion on the advantages and usage of hot air circulating drying oven
- 2019-01-24-

  Hot air circulating drying ovenOften used as high drying temperature materials, why there are so many enterprises choose hot air circulation oven as a dryer to produce their own products, it has what benefits, the following we will enumerate its advantages.

1th: Economic and practical, high output value, economic and practical is because its price is relatively equal to the size of other equipment, it is much cheaper, the same price and more than other equipment, and a one-time output value is much higher, about the production enterprises, investment efficiency is much larger, so many enterprises because of its low price of the beauty and choice;

2nd: Protection convenience, easy to use; hot air cycle oven can be used without the need for complex operation, and easy to use, protection is also very convenient, such as the parts of the bad damage, simple replacement, a general electrician can complete the repair, and in the future if the function of short demand to make up, the transformation is relatively simple;

3rd: About high temperature requirements, and no special requirements of the material, very suitable, one-time production value is much more, because its interior can carry far more materials than the same volume of vacuum drying box and other drying equipment

4th: Energy Saving and emission reduction effect is good; we know that the more energy you can produce the more products, then the more energy-saving, energy-saving boundary is not said to have to reach what kind of power consumption is called energy saving, energy saving can be said than the usual use of other equipment used less energy, the higher the output value, that is, energy saving

Hot air circulating oven in use with the following considerations:

1. Hot air circulation oven must be placed in the indoor drying and horizontal place, to avoid vibration, corrosion.

2. Safe use of electricity should be noted, according to the hot air cycle oven power consumption to install sufficient capacity of the power supply gate knife. Choose enough power wires and have outstanding grounding wires.

3. The mercury thermometer thermostat with electrical contact shall be separated from the two wires of the electrical contact thermometer to two wiring columns at the top of the box. Another general mercury thermometer is inserted into the exhaust valve, (the thermometer in the exhaust valve is used to correct the electric contact Mercury thermometer and the actual temperature in the investigation box) to open the hole of the exhaust valve. Adjust the electrical contact Mercury thermometer to the desired temperature and fasten the screws on the steel cap to reach the intention of constant temperature. However, it is important to note that when adjusting, do not spin the indicator iron outside the scale.

4. When all the preparation is properly arranged, the test product can be placed in the hot air circulation oven, and then connected and turned on the power supply, red indicator light indicates that the box has been heated. When the temperature reaches the controlled temperature, the red light calms the green light and begins to constant temperature. In order to avoid the failure of temperature control, you must also look after.